Title 33 NAVIGATION AND NAVIGABLE WATERS
PART 181 MANUFACTURER REQUIREMENTS
Subpart B—Manufacturer Certification of Compliance
§181.5 Purpose and applicability.
This subpart prescribes requirements for the certification of boats and
associated equipment to which 46 U.S.C. Chapter 43 applies and to which a
safety standard prescribed in Part 183 of this chapter applies.
[CGD 85-002, 51 FR 37573, Oct. 23, 1986]
§181.7 Compliance certification label
required.
Unless there is affixed to it a certification label that contains the
information required by §181.15:
(a) No person who manufactures, constructs, or assembles a boat or
associated equipment may deliver that boat or equipment for the purpose of
sale;
(b) No person may import into the United States any boat or associated
equipment; and
(c) No person engaged in the business of selling or distributing boats
or associated equipment may sell or offer for sale any boat or associated
equipment.
§181.9 Affixing labels.
(a) Each manufacturer of a boat or item of associated equipment to
which a standard or regulation prescribed in Part 183 of this chapter
applies shall affix a certification label that contains the information
required by §181.15 to that boat or equipment before it:
(1) Leaves the place of manufacture for the purpose of sale; or
(2) Is imported.
(b) The manufacturer of a boat or item of associated equipment that is
sold to a private label merchandiser may, at the option of the private
label merchandiser, affix a certification label identifying the private
label merchandiser as the manufacturer before the boat or item of
associated equipment leaves the place of manufacture.
§181.11 Exceptions to labeling requirement.
(a) This part does not apply to boats or associated equipment intended
solely for export, and so labeled, tagged, or marked on the boat or
equipment and on the outside of the container, if any, which is exported.
(b) If an item of associated equipment is so small that a certification
label that meets the requirements in §181.15 cannot be affixed to it, a
certification label that contains the information required by §181.15 may
be printed on the smallest container in which the item is packed or on a
slip packed with the item.
(c) This subpart does not apply to any outboard motor or starting
control to which §183.710 of this chapter applies.
[CGD 72-60, 37 FR 15779, Aug. 4, 1972, as amended by CGD
79-137, 46 FR 3515, Jan. 15, 1981; 46 FR 9579, Jan. 29, 1981]
§181.13 Removal of labels.
No person may remove a label required by this part or remove or alter
any information on a label required by this part, unless authorized by the
Commandant.
§181.15 Contents of labels.
(a) Each label required by §181.7 must contain:
(1) The name and address of the manufacturer or private label
merchandiser who certifies that the boat or item of associated equipment
complies with the standards prescribed in Part 183 of this subchapter; and
(2) Except as provided in paragraph (c) of this section, the words:
(i) “This (insert ‘Boat’ or ‘Equipment’) Complies With U.S. Coast Guard
Safety Standards In Effect On (insert date of certification as prescribed
in paragraph (b) of this section)”; or
(ii) If the item being certified is a boat, the label may show the
words, “This Boat Complies With U.S. Coast Guard Safety Standards In
Effect On The Date of Certification.”
(b) Date of certification must be no earlier than the date on which
construction or assembly began and no later than the date on which the
boat or item of associated equipment leaves the place of manufacture or
assembly or import for the purposes of sale.
(c) [Reserved]
(d) Except as provided in paragraph (e) of this section, the
manufacturer may, in addition to the information required by paragraphs
(a) and (b) of this section, display on the certification label any or all
of the following information:
(1) Model name or designation.
(2) Hull identification number (if a boat) or serial number (if an item
of associated equipment).
(3) Model year.
(e) Display of the hull identification number on the certification
label does not satisfy the display requirements of §181.29.
(f) Each boat which displays a maximum horsepower capacity determined
in accordance with §183.53(b) must, in addition to the information
required by paragraphs (a), (b) and (d) of this section, display on the
certification label, the following statement in letters no less than
one-quarter of an inch in height:
THIS BOAT IS INTENDED FOR RACING AND OTHER HIGH PERFORMANCE ACTIVITIES.
THE SKILL REQUIRED MAY EXCEED THE ABILITIES OF SOME OPERATORS.
[CGD 72-60, 37 FR 15779, Aug. 4, 1972, as amended by CGD
83-012, 49 FR 39327, Oct. 5, 1984; CGD 85-002, 51 FR 37573, Oct. 23, 1986;
USCG-1999-5832, 64 FR 34716, June 29, 1999]
§181.17 Label numbers and letters.
Letters and numbers on each label must:
(a) Be no less than one-eighth of an inch in height; and
(b) Contrast with the basic color of the label, except that the date of
certification may be permanently stamped, engraved, or embossed on the
label.
§181.19 Construction of labels.
(a) Each label must be made of material that can withstand exposure to
water, oil, salt spray, direct sunlight, heat, cold, and wear expected in
normal use of the boat or item of associated equipment without
deterioration of legibility.
(b) Each label must be made of material that shows visible traces of
the alteration or removal of information on the label.
|